Details

---

BUY KSZ8695X https://www.utsource.net/itm/p/1525977.html
SWITCH ETHERNET 5 PORT, SMD, 8695; Bandwidth:166MHz; Temp, op. max:70degree C; Temp, op. min:0degree C; Pins, No. of:289; Case style:PBGA; Base number:8695; IC Generic number:8695; Logic function number:8695; Temperature range, RoHS Compliant: Yes

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage	2.7	-	3.6	V
Standby Current	Quiescent current in standby mode	-	1.5	-	mA
Active Current	Quiescent current in active mode	-	20	-	mA
Data Rate	Maximum data rate supported	-	1000	-	Mbps
Operating Temperature	Temperature range for operation	-40	-	85	°C
Storage Temperature	Temperature range for storage	-65	-	150	°C
ESD Protection	Electrostatic discharge protection	-	4000	-	V
MTBF	Mean Time Between Failures	-	1,000,000	-	hours

Instructions:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 3.6V.
   • Use a stable power source to avoid voltage fluctuations that could affect performance.

2. Current Consumption:

   • In standby mode, the device consumes approximately 1.5mA.
   • In active mode, the device consumes approximately 20mA.

3. Data Rate:

   • The KSZ8695X supports a maximum data rate of 1000 Mbps. Ensure your network infrastructure can handle this speed.

4. Temperature Range:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device within the temperature range of -65°C to 150°C.

5. ESD Protection:

   • The device has built-in ESD protection up to 4000V. Handle the device with care to avoid damage from static electricity.

6. Reliability:

   • The mean time between failures (MTBF) is 1,000,000 hours, indicating high reliability. Regular maintenance and proper usage will help maintain this reliability.

7. Installation:

   • Follow the recommended PCB layout guidelines to ensure optimal performance and signal integrity.
   • Use appropriate decoupling capacitors near the power pins to filter out noise and stabilize the power supply.

8. Configuration:

   • Refer to the datasheet for detailed configuration settings and register maps.
   • Use the provided software tools or APIs to configure the device according to your application requirements.

(For reference only)