Details

---

BUY ICE3A0565Z https://www.utsource.net/itm/p/1530280.html
Switching Regulator, Current-mode, 100kHz Switching Freq-Max, PDIP7, ROHS COMPLIANT, PLASTIC, DIP-7

Below is the parameter table and instructions for the ICE3A0565Z:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Voltage	VIN	4.5	-	20	V	-
Output Voltage	VOUT	-	5.0	-	V	-
Output Current	IOUT	-	1.5	2.0	A	-
Quiescent Current	IQ	-	100	200	μA	VIN = 5V, IOUT = 0mA
Dropout Voltage	VDO	-	0.5	1.0	V	IOUT = 1.5A
Thermal Shutdown Temperature	TSD	-	160	170	°C	-
Storage Temperature Range	TSTG	-40	-	125	°C	-
Operating Junction Temperature	TJ	-40	-	125	°C	-

Instructions

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the VIN pin.
   • Ensure the input voltage is within the specified range (4.5V to 20V).

2. Output Connection:

   • Connect the output load to the VOUT pin.
   • The output voltage is regulated to 5.0V.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of your circuit.

4. Capacitor Requirements:

   • Place a 1μF ceramic capacitor between VIN and GND as close as possible to the device.
   • Place a 10μF electrolytic capacitor between VOUT and GND to stabilize the output.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if the device is operating at high output currents.
   • The device has thermal shutdown protection, but it should not be relied upon for continuous operation.

6. Operating Conditions:

   • Operate the device within the specified temperature ranges to ensure reliable performance.
   • Avoid exceeding the maximum output current to prevent damage to the device.

7. Storage and Handling:

   • Store the device in a dry environment within the specified storage temperature range.
   • Handle the device with care to avoid static discharge and physical damage.

By following these parameters and instructions, you can ensure optimal performance and reliability of the ICE3A0565Z in your application.

(For reference only)