Details

---

BUY CD4076BE https://www.utsource.net/itm/p/1547154.html
4-Bit D-Type RegistersD

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous operation	3.0	-	18	V
Input Low Voltage	VIL	VCC = 5V	0.8	-	1.5	V
Input High Voltage	VIH	VCC = 5V	3.5	-	5.0	V
Output Low Voltage	VOL	IOL = 4mA, VCC = 5V	0.4	-	0.9	V
Output High Voltage	VOH	IOH = -0.4mA, VCC = 5V	3.5	-	5.0	V
Propagation Delay Time	tpd	VCC = 5V, VOH = 3.5V, VOL = 1.5V	-	22	40	ns
Power Dissipation	PD	Continuous operation	-	-	500	mW
Operating Temperature	TA	Continuous operation	-40	-	85	°C
Storage Temperature	TSTG	Storage	-65	-	150	°C

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 3.0V to 18V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Input Levels:

   • For reliable operation, ensure that input signals are within the specified input low (V_IL) and input high (V_IH) voltage ranges.
   • Input signals should not exceed V_CC or go below ground (0V).

3. Output Levels:

   • The output low voltage (V_OL) and output high voltage (V_OH) should be within the specified limits to ensure proper logic levels.
   • Ensure that the load connected to the output does not draw more current than the device can handle (I_OL and I_OH).

4. Propagation Delay (t_pd):

   • The propagation delay time is the time it takes for the output to change state after the input changes. This parameter is crucial for timing considerations in digital circuits.
   • The typical value is 22ns, but it can vary between 22ns and 40ns.

5. Power Dissipation (P_D):

   • The maximum power dissipation is 500mW. Ensure that the device is not operated beyond this limit to avoid overheating and potential damage.

6. Temperature Ranges:

   • The operating temperature range is from -40°C to 85°C. Ensure that the device is used within this range to maintain reliability.
   • The storage temperature range is from -65°C to 150°C. Store the device in a suitable environment to prevent damage.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD protection when handling the device.

8. Mounting and Soldering:

   • Follow recommended soldering profiles to avoid thermal stress.
   • Ensure proper alignment and orientation during mounting to prevent short circuits or incorrect connections.

By adhering to these parameters and instructions, you can ensure the reliable and efficient operation of the CD4076BE.

(For reference only)