Details

---

BUY 2DI150D-050C https://www.utsource.net/itm/p/1569472.html
Power Transistor Module

Below is the parameter table and instructions for the 2DI150D-050C diode.

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Forward Voltage	( V_F )	-	0.7	1.0	V
Reverse Breakdown Voltage	( V_ )	50	-	50	V
Peak Reverse Current	( I_ )	-	-	5	μA
Average Rectified Forward Current	( I_{F(AV)} )	-	-	150	mA
Surge Peak Forward Current	( I_ )	-	-	1.5	A
Junction Temperature	( T_J )	-	-	150	°C
Storage Temperature	( T_S )	-55	-	150	°C
Thermal Resistance (Junction to Ambient)	( R_{theta JA} )	-	-	250	K/W

Instructions

1. Handling and Storage:

   • Store the diode in a dry, cool place away from direct sunlight.
   • Handle the diode with care to avoid mechanical damage or electrostatic discharge (ESD).

2. Mounting:

   • Ensure that the diode is mounted on a suitable heat sink if it will be operating at high power levels.
   • Use proper mounting techniques to ensure good thermal contact and mechanical stability.

3. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse polarity, which can lead to device failure.
   • Use appropriate wire gauge and connections to minimize resistance and inductance.

4. Operating Conditions:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Ensure that the junction temperature does not exceed 150°C to prevent thermal damage.
   • For continuous operation, keep the average rectified forward current within the rated limit.

5. Testing:

   • Test the diode using a multimeter or diode tester to ensure it is functioning correctly.
   • Check for continuity between the anode and cathode; a good diode should show low resistance in one direction and high resistance in the other.

6. Soldering:

   • Use a controlled soldering process to avoid overheating the diode.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.

7. Safety:

   • Always follow safety guidelines when working with electrical components.
   • Use appropriate personal protective equipment (PPE) such as gloves and goggles.

By following these instructions, you can ensure the reliable and safe operation of the 2DI150D-050C diode.

(For reference only)