Details

---

BUY SKDH115/12 https://www.utsource.net/itm/p/1570112.html
Transistor; Type: Amplifiers/Bipolar; VCEO V: 5; Ic A: 0.5; hFE: 110 to 190; fT GHz typ: 10.5; Cob pF max: 2; Package: MPAK

Parameter	Description	Value
Part Number	Full part number	SKDH115/12
Type	Type of component	Diode
Package	Package type	DO-204 (AA)
Polarity	Polarity	Unidirectional
Maximum Reverse Voltage (Vr)	Maximum reverse voltage the diode can withstand	1000 V
Maximum Forward Current (If)	Maximum forward current the diode can handle	1.5 A
Peak Reverse Current (Irm)	Peak reverse current the diode can handle	30 mA
Forward Voltage Drop (Vf)	Forward voltage drop at specified current	1.1 V @ 1.5 A
Reverse Recovery Time (trr)	Time it takes for the diode to recover from reverse bias	500 ns
Operating Temperature Range (Tamb)	Ambient operating temperature range	-65°C to +150°C
Storage Temperature Range (Tstg)	Storage temperature range	-65°C to +150°C
Thermal Resistance (Rth)	Thermal resistance from junction to ambient	25 °C/W
Power Dissipation (Pd)	Maximum power dissipation at 25°C ambient	1.5 W
Mounting Type	Method of mounting	Through-hole

Instructions:

1. Handling and Storage:

   • Store the diode in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical stress or damage to the leads.

2. Soldering:

   • Use a soldering iron with a temperature setting of 350°C (662°F) or less.
   • Solder each lead for no more than 5 seconds to prevent thermal shock to the diode.
   • Allow the diode to cool naturally after soldering.

3. Electrical Connections:

   • Ensure that the diode is connected with the correct polarity. The cathode (marked band) should be connected to the positive side of the circuit.
   • Do not exceed the maximum ratings listed in the table to avoid damaging the diode.

4. Testing:

   • Use a multimeter to test the diode. In forward bias, the diode should show a low resistance (approximately 1.1 V at 1.5 A). In reverse bias, the diode should show high resistance.

5. Mounting:

   • Ensure the diode is securely mounted to the PCB or heatsink to maintain good thermal contact.
   • Use appropriate clamps or fasteners if mounting to a heatsink.

6. Environmental Considerations:

   • The diode is RoHS compliant and suitable for use in environmentally friendly applications.
   • Dispose of the diode according to local regulations for electronic waste.

(For reference only)