Details

---

BUY MCC95-08IO1B https://www.utsource.net/itm/p/1570371.html
Thyristor Modules Thyristor/Diode Modules

Parameter	Description
Part Number	MCC95-08IO1B
Type	Relay Module
Channels	8 Channels
Load Voltage	DC 30V / AC 250V
Load Current	5A per channel
Input Voltage	5V DC (TTL Level)
Isolation Voltage	2500Vrms for 1 minute
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +85°C
Dimensions	67mm x 45mm x 25mm
Weight	50g

Instructions:

1. Installation:

   • Ensure the relay module is installed in a well-ventilated area to prevent overheating.
   • Mount the module on a flat, stable surface using the provided mounting holes.

2. Wiring:

   • Connect the input control signals to the IN1 to IN8 terminals using 5V TTL level signals.
   • Connect the load devices to the COM, NO (Normally Open), and NC (Normally Closed) terminals corresponding to each channel.

3. Power Supply:

   • Connect the appropriate load voltage to the VCC and GND terminals of the relay module.
   • Ensure that the power supply meets the specifications listed in the parameter table.

4. Operation:

   • Apply a logic high signal to the input terminal to activate the corresponding relay channel.
   • The relay will switch between the NO and NC states based on the input signal.

5. Safety Precautions:

   • Do not exceed the maximum load voltage and current ratings.
   • Avoid connecting or disconnecting wires while the module is powered.
   • Use appropriate fuses and circuit protection devices to safeguard against electrical faults.

6. Maintenance:

   • Regularly inspect the connections and terminals for any signs of wear or damage.
   • Keep the module clean and free from dust and debris to ensure optimal performance.

(For reference only)