Details

---

BUY SKM400GA128D https://www.utsource.net/itm/p/1570874.html
SPT IGBT Modules

Parameter	Description	Value	Unit
Type	IGBT Module
Part Number	SKM400GA128D
Collector-Emitter Voltage (Vce)	Maximum voltage between collector and emitter	1200	V
Continuous Collector Current (Ic)	Continuous current through the collector	400	A
Pulse Collector Current (Icm)	Peak pulse current through the collector	600	A
Emitter-Base Voltage (Ueb)	Maximum voltage between emitter and base	20	V
Junction Temperature (Tj)	Operating junction temperature range	-40 to 150	°C
Storage Temperature (Tstg)	Storage temperature range	-40 to 125	°C
Thermal Resistance, Junction to Case (Rth,jc)	Thermal resistance from junction to case	0.2	K/W
Isolation Voltage (Ui)	Dielectric strength between terminals	2500	Vrms

Instructions for Use:

1. Installation:

   • Ensure that the mounting surface is flat and clean to achieve optimal thermal performance.
   • Tighten the screws evenly to prevent warping of the module.

2. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Use appropriate ESD protection measures to prevent damage from static electricity.

3. Electrical Connections:

   • Verify all connections are secure and correctly wired according to the circuit diagram.
   • Ensure the power supply and control signals are within the specified limits before applying power.

4. Heat Sink:

   • Attach a suitable heat sink to maintain the junction temperature within the operational limits.
   • Apply thermal compound between the module and the heat sink for better heat transfer.

5. Operation:

   • Monitor the temperature and current levels during operation to ensure they remain within safe operating areas.
   • Avoid exceeding the maximum ratings as listed in the parameter table.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive environments.

(For reference only)