Details

---

BUY TIBPAL20R4-25CNT https://www.utsource.net/itm/p/1574121.html
LOW-POWER HIGH-PERFORMANCE IMPACT E PAL CIRCUITS

Parameter	Value	Unit
Part Number	TIBPAL20R4-25CNT	-
Type	Bipolar Transistor	-
Package	TO-252 (DPAK)	-
Collector-Emitter Voltage (Vce)	600	V
Emitter-Base Voltage (Veb)	7	V
Collector Current (Ic)	10	A
Power Dissipation (Ptot)	75	W
Operating Temperature Range	-55 to +150	°C
Storage Temperature Range	-65 to +150	°C
Hfe (min)	10	-
Hfe (max)	100	-
Transition Frequency (ft)	3	MHz
Base-Emitter Saturation Voltage (Vbe(sat))	1.8 to 2.5	V
Collector-Emitter Saturation Voltage (Vce(sat))	1.2 to 2.0	V
Storage Moisture Sensitivity Level (MSL)	3	-

Instructions:

1. Handling and Storage:

   • Store in a dry environment to prevent moisture damage.
   • Handle with care to avoid mechanical stress on the leads and package.
   • Follow the Moisture Sensitivity Level (MSL) guidelines for proper handling and storage.

2. Mounting:

   • Ensure proper heat sinking for applications where the power dissipation is significant.
   • Use appropriate soldering techniques and temperatures to avoid damaging the component.
   • Avoid excessive torque when mounting the component to prevent lead damage.

3. Electrical Connections:

   • Connect the collector, base, and emitter terminals correctly to avoid damage.
   • Use decoupling capacitors if necessary to stabilize the circuit.
   • Ensure that the operating voltages and currents do not exceed the specified limits.

4. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the transistor.
   • Test the transistor under controlled conditions to ensure it meets the specified parameters.

5. Safety:

   • Always use appropriate safety measures when working with high voltages and currents.
   • Ensure that the circuit is properly insulated to prevent electrical shocks.

6. Environmental Considerations:

   • Dispose of the component in accordance with local environmental regulations.
   • Use lead-free solder if required by environmental standards.

(For reference only)