Details

---

BUY CD4069UBCM https://www.utsource.net/itm/p/1705160.html
Inverter Circuits; Package: SOIC; No of Pins: 14; Container: Rail

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	3.0	-	18.0	V
Input Low Voltage	VIL	VCC = 5V	0.8	-	-	V
Input High Voltage	VIH	VCC = 5V	-	-	2.0	V
Output Low Voltage	VOL	IOL = 4mA, VCC = 5V	0.4	-	-	V
Output High Voltage	VOH	IOH = -0.4mA, VCC = 5V	-	-	4.5	V
Propagation Delay Time (Low to High)	tPLH	VCC = 5V, f = 10kHz	10	18	36	ns
Propagation Delay Time (High to Low)	tPHL	VCC = 5V, f = 10kHz	10	18	36	ns
Power Dissipation	PD	Per Package	-	-	700	mW

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 3.0V to 18.0V.
   • Connect V_CC to the positive power supply and GND to the ground.

2. Input Levels:

   • For a logic low input (V_IL), the voltage should be less than or equal to 0.8V when V_CC is 5V.
   • For a logic high input (V_IH), the voltage should be greater than or equal to 2.0V when V_CC is 5V.

3. Output Levels:

   • The output low voltage (V_OL) should not exceed 0.4V when sourcing 4mA and V_CC is 5V.
   • The output high voltage (V_OH) should be at least 4.5V when sinking -0.4mA and V_CC is 5V.

4. Propagation Delay:

   • The propagation delay times (t_PLH and t_PHL) are typically 18ns but can vary between 10ns and 36ns under standard conditions (V_CC = 5V, f = 10kHz).

5. Power Dissipation:

   • The maximum power dissipation for the entire package is 700mW. Ensure that the device is not operated beyond this limit to avoid damage.

6. Handling:

   • Handle the CD4069UBCM with care to avoid static discharge, which can damage the device.
   • Store the device in a dry environment to prevent moisture damage.

7. Layout Considerations:

   • Use short and direct traces for power and ground connections to minimize noise.
   • Place decoupling capacitors close to the power pins to filter out high-frequency noise.

8. Testing:

   • Before integrating the CD4069UBCM into a circuit, test it individually to ensure proper functionality.
   • Verify the input and output voltages using a multimeter to confirm correct operation.

(For reference only)