Details

---

BUY DG300ACJ https://www.utsource.net/itm/p/1714876.html

Parameter	Description
Part Number	DG300ACJ
Type	Analog Switch
Configuration	Single Pole Double Throw (SPDT)
Supply Voltage	±5V to ±18V (Dual Supply), 0V to 36V (Single Supply)
On Resistance	2.5Ω (Max)
Off Isolation	90dB (Min) @ 1kHz
Bandwidth	20MHz (Typ)
Input Signal Level	±5V (Max)
Package	SOIC-8
Operating Temp.	-40°C to +85°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of ±5V to ±18V for dual supply or 0V to 36V for single supply.

2. Signal Handling:

   • The input signal level should not exceed ±5V to prevent damage to the device.
   • For optimal performance, keep signal levels as close to the mid-supply voltage as possible when using a single supply configuration.

3. Installation:

   • Install the DG300ACJ in a suitable location on the PCB with adequate clearance around it for soldering and inspection.
   • Ensure correct orientation during installation to avoid damage or malfunction.

4. Testing:

   • After installation, test the switch under typical operating conditions to ensure it meets the bandwidth and isolation specifications.
   • Verify that the on-resistance does not exceed the maximum specified value.

5. Operating Environment:

   • Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
   • Avoid exposing the device to excessive humidity or corrosive environments.

6. Handling:

   • Handle with care to avoid damaging the pins or the package.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

(For reference only)