Details

---

BUY EPF8282ALC84-3 https://www.utsource.net/itm/p/1728027.html
Eval Board for HFA1110 750MHz, Low Distortion Unity Gain, Closed Loop Buffer

Parameter	Description	Value
Device	Device Type	EPF8282ALC84-3
Package	Package Type	84-Pin PLCC (Plastic Leaded Chip Carrier)
I/O Pins	Number of Input/Output Pins	64
Logic Cells	Number of Logic Cells	2,820
Macrocells	Number of Macrocells	128
User Flash Memory	User Flash Memory Size	512 bits
Internal Oscillator	Internal Oscillator Frequency Range	0 to 50 MHz
External Clock	External Clock Frequency Range	0 to 100 MHz
Operating Voltage	Vcc Supply Voltage Range	3.3V ± 10%
Standby Current	Standby Current	5 μA (typical)
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Programming Voltage	Vpp Programming Voltage	12.0V ± 5%
Configuration Modes	Configuration Modes Supported	ISP (In-System Programming), JTAG, ByteBlaster II
Programming Time	Typical Programming Time	1 second (typical)
ESD Protection	ESD Protection Level	HBM (Human Body Model) 2000V
RoHS Compliance	RoHS Compliance	Yes
Lead Finish	Lead Finish	Tin/Lead (SnPb) or Matte Tin

Instructions for Use:

1. Power Supply:

   • Ensure the Vcc supply voltage is within the range of 3.3V ± 10%.
   • Connect the Vcc pin to a stable power source and ground the GND pins.

2. Clocking:

   • Use the internal oscillator for frequencies up to 50 MHz.
   • For higher frequencies, connect an external clock source to the appropriate input pin, ensuring the frequency is within the 0 to 100 MHz range.

3. Programming:

   • Use ISP (In-System Programming) for programming the device while it is mounted on the board.
   • Alternatively, use JTAG or ByteBlaster II for programming.
   • Apply the Vpp programming voltage of 12.0V ± 5% during the programming process.

4. Configuration:

   • Configure the device using the supported configuration modes.
   • Follow the specific programming software guidelines provided by Altera (now part of Intel).

5. Handling:

   • Handle the device with care to avoid ESD damage.
   • Store the device in an ESD-safe environment when not in use.

6. Environmental Considerations:

   • Operate the device within the specified temperature range of -40°C to +85°C.
   • Ensure proper ventilation and cooling if operating at high temperatures.

7. Standby Mode:

   • To reduce power consumption, place the device in standby mode when not actively processing data.
   • The typical standby current is 5 μA.

8. Mounting:

   • Use the recommended soldering profile for the 84-Pin PLCC package.
   • Ensure all pins are properly aligned and soldered to the PCB.

9. Testing:

   • After programming and mounting, perform functional tests to ensure the device operates as expected.
   • Use boundary scan testing via JTAG for fault detection and diagnosis.

For detailed technical specifications and additional information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)