Details

---

BUY MM74HCT04N https://www.utsource.net/itm/p/1730333.html
ANA 5V 750MA LIN LDO REG; Package: TO-220 5 LEAD STANDARD; No of Pins: 5; Container: Rail; Qty per Container: 50

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Low Voltage	VIL	VCC = 4.5V to 5.5V	-	-	1.5	V
Input High Voltage	VIH	VCC = 4.5V to 5.5V	3.5	-	-	V
Output Low Voltage	VOL	IOL = 8 mA	0.0	-	0.4	V
Output High Voltage	VOH	IOH = -0.4 mA	2.4	-	VCC	V
Input Leakage Current	IIL	VCC = 0 to 6V	-	-	±1.0	μA
Output Leakage Current	IOL (low)	VCC = 4.5 to 5.5V, VO = 0V	-	-	16.0	μA
Output Leakage Current	IOH (high)	VCC = 4.5 to 5.5V, VO = VCC	-	-	-4.0	μA
Propagation Delay Time	tpd	VCC = 4.5 to 5.5V, VOH = 3.5V, VOL = 1.5V	-	12	-	ns
Power Dissipation	PD	Continuous, per package	-	-	100	mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range (2.0V to 6.0V).
   • Connect V_CC to the positive power supply and GND to the ground.

2. Input Signals:

   • Apply input signals such that the low input voltage (V_IL) does not exceed 1.5V and the high input voltage (V_IH) is at least 3.5V when V_CC is between 4.5V and 5.5V.
   • Ensure input leakage current (I_IL) is within ±1.0μA.

3. Output Signals:

   • The output low voltage (V_OL) should be less than or equal to 0.4V when sourcing 8mA.
   • The output high voltage (V_OH) should be at least 2.4V when sinking -0.4mA.
   • Ensure output leakage currents (I_OL and I_OH) are within the specified limits.

4. Propagation Delay:

   • The propagation delay time (t_pd) should be around 12ns under typical conditions.

5. Power Dissipation:

   • Do not exceed the maximum power dissipation (P_D) of 100mW to avoid overheating and potential damage to the device.

6. Handling:

   • Handle the MM74HCT04N with care to avoid static discharge, which can damage the internal components.
   • Store in a dry environment and follow ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)