Details

---

BUY SN74S241N https://www.utsource.net/itm/p/1731259.html
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		4.75		5.25	V
Output High Level	VOH	IOL = -0.4 mA, VCC = 5 V	2.7		5.0	V
Output Low Level	VOL	IOL = 16 mA, VCC = 5 V	0		0.5	V
Input High Level	VIH	IIL = -0.4 mA, VCC = 5 V	2.0		5.0	V
Input Low Level	VIL	IIL = 1.6 mA, VCC = 5 V	0		0.8	V
Propagation Delay Time	tpd	VCC = 5 V, TA = 25°C	12		22	ns
Power Dissipation	PD	VCC = 5 V, TA = 25°C		330		mW
Operating Temperature	TA		-55		125	°C
Storage Temperature	TSTG		-65		150	°C

Instructions for Using SN74S241N

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75 V to 5.25 V.
   • Connect the ground (GND) pin to a stable 0 V reference.

2. Input Signals:

   • Apply input signals (V_IH, V_IL) that meet the specified levels to ensure proper logic operation.
   • Use appropriate pull-up or pull-down resistors if necessary to maintain signal integrity.

3. Output Signals:

   • The output high level (V_OH) should be at least 2.7 V when the output is driving a load of -0.4 mA.
   • The output low level (V_OL) should be no more than 0.5 V when the output is sinking 16 mA.

4. Propagation Delay:

   • Account for the propagation delay time (t_pd) of 12 to 22 ns in your timing calculations to ensure correct signal timing.

5. Power Dissipation:

   • Monitor the power dissipation (P_D) to avoid exceeding 330 mW, which could lead to overheating.

6. Temperature Considerations:

   • Operate the device within the temperature range of -55°C to 125°C to ensure reliable performance.
   • Store the device in an environment with temperatures between -65°C and 150°C.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

By following these guidelines, you can ensure the optimal performance and longevity of the SN74S241N.

(For reference only)