Details

---

BUY DM74ALS05AN https://www.utsource.net/itm/p/1731951.html
Hex Inverter

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	1.8	3.6	5.5	V
Input Low Voltage	VIL	-	0	-	0.8	V
Input High Voltage	VIH	-	2.0	-	VCC	V
Output Low Voltage	VOL	IOL = 400 μA	0	-	0.4	V
Output High Voltage	VOH	IOH = -400 μA	2.4	-	VCC	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25°C	-	9	-	ns
Power Dissipation	PD	Maximum	-	-	500	mW
Operating Temperature Range	TA	-	-40	-	85	°C
Storage Temperature Range	TSTG	-	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 1.8V to 5.5V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals that meet the specified input low (V_IL) and high (V_IH) voltage levels.
   • Avoid applying voltages outside the operating range to prevent damage to the device.

3. Output Signals:

   • The output low (V_OL) and high (V_OH) voltages should be within the specified limits under the given load conditions.
   • Ensure the load current does not exceed the maximum ratings to avoid overheating or damage.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 9ns at 5V supply voltage and 25°C ambient temperature.
   • Consider this delay when designing timing-sensitive circuits.

5. Thermal Management:

   • The device can dissipate up to 500mW of power. Ensure adequate heat dissipation if operating near the maximum power limit.
   • Operate the device within the specified temperature ranges to ensure reliable performance.

6. Storage:

   • Store the device in a dry environment with temperatures between -65°C and 150°C to prevent damage during storage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Follow proper ESD (Electrostatic Discharge) precautions when handling and soldering the device.

By following these guidelines, you can ensure optimal performance and longevity of the DM74ALS05AN.

(For reference only)