Details

---

BUY CD4096BE https://www.utsource.net/itm/p/1743582.html
Logic IC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	3		18	V
Input Voltage (High)	VIH	VIL ≤ VIN ≤ VDD	0.7VDD		VDD	V
Input Voltage (Low)	VIL	0 ≤ VIN ≤ VIH	0		0.3VDD	V
Output Voltage (High)	VOH	IO = -1mA	0.9VDD		VDD - 0.5	V
Output Voltage (Low)	VOL	IO = 1mA	0		0.1VDD + 0.5	V
Propagation Delay Time	tpd	VDD = 15V, fIN = 1MHz	25	35	50	ns
Power Dissipation	PD	Continuous			100	mW
Operating Temperature	TA	Commercial	0		70	°C
Storage Temperature	TSTG		-65		150	°C

Instructions for Using CD4096BE:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 3V to 18V.
   • Connect the ground (GND) pin to a stable reference point.

2. Input Signals:

   • For a logic high input, ensure the input voltage (V_IN) is at least 0.7 times the supply voltage (V_DD).
   • For a logic low input, ensure the input voltage (V_IN) is no more than 0.3 times the supply voltage (V_DD).

3. Output Signals:

   • The output voltage (V_OUT) will be close to V_DD for a logic high and close to 0V for a logic low.
   • Ensure the load current (I_O) does not exceed the specified limits to avoid damage.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for a change in the input signal to affect the output. It varies with supply voltage and temperature.

5. Thermal Considerations:

   • The device can operate continuously with a power dissipation up to 100mW.
   • Ensure the operating temperature (T_A) is between 0°C and 70°C for commercial applications.
   • Store the device in a temperature range between -65°C and 150°C.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use appropriate ESD protection measures when handling or soldering the device.

7. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified parameters.
   • Use a multimeter to verify the supply voltage and output levels.

By following these instructions, you can ensure reliable operation of the CD4096BE.

(For reference only)