Details

---

BUY CD4009AE https://www.utsource.net/itm/p/1832354.html
IC,LOGIC GATE,HEX INVERTER,CMOS,DIP,16PIN,PLASTIC

Below is the parameter table and instructions for the CD4009AE, which is a 16-bit Binary Counter with Preset, part of the 4000 series CMOS logic family.

CD4009AE Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	3	10	15	V
Input Voltage (High)	VIH	-0.5		VDD + 0.5	V
Input Voltage (Low)	VIL	VSS - 0.5		0.8	V
Output Voltage (High)	VOH	VDD - 0.1		VDD - 0.5	V	IO = 0.1 mA
Output Voltage (Low)	VOL	0		0.1	V	IO = 1.6 mA
Propagation Delay Time	tpd	20	60	100	ns	VDD = 10 V, f = 1 MHz
Power Consumption	Ptot	0.01	0.1	1	mW	VDD = 10 V, f = 1 MHz
Operating Temperature Range	TA	-40		85	掳C
Storage Temperature Range	TSTG	-65		150	掳C

Instructions for CD4009AE

1. Power Supply:

   • Connect the V_DD pin to the positive supply voltage (3V to 15V).
   • Connect the V_SS pin to the ground (0V).

2. Input Signals:

   • Apply the clock signal to the Clock (CP) input.
   • Use the Preset Enable (PE) input to enable or disable the preset function.
   • Apply the desired preset values to the Preset Data (D0-D15) inputs when PE is active.

3. Output Signals:

   • The 16 output pins (Q0-Q15) will provide the binary count.
   • The output state can be latched using the Latch Enable (LE) input.

4. Reset Function:

   • The Reset (R) input can be used to reset the counter to zero.
   • Ensure the reset pulse is long enough to ensure proper reset operation.

5. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for the output to change after the clock edge.
   • Ensure that the clock frequency is within the specified range to avoid timing issues.

6. Power Consumption:

   • The power consumption increases with higher supply voltages and higher clock frequencies.
   • Ensure adequate heat dissipation if operating at high frequencies or high temperatures.

7. Operating and Storage Temperature:

   • The device is designed to operate within the specified temperature range.
   • Store the device in a dry environment within the storage temperature range to prevent damage.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the CMOS circuitry.
   • Use appropriate ESD protection measures during handling and installation.

By following these parameters and instructions, you can effectively use the CD4009AE in your digital circuits.

(For reference only)