Details

---

BUY CM300HA1-24H https://www.utsource.net/itm/p/1864877.html
HIGH POWER SWITCHING USE INSULATED TYPE

Parameter	Description
Part Number	CM300HA1-24H
Type	Power Module
Package Type	DIP (Dual Inline Package)
Input Voltage	8V to 36V
Output Voltage	Adjustable, typically set by external resistors
Output Current	Up to 300mA
Switching Frequency	250kHz
Efficiency	Up to 90% depending on input/output conditions
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +125°C
Protection Features	Overcurrent, Overvoltage, Thermal Shutdown
Applications	Industrial control, consumer electronics, automotive

Instructions:

1. Installation: Ensure the module is mounted on a suitable heatsink if operating at high output power levels.
2. Connections: Connect the input voltage to the VIN pin and ground to GND. Set the desired output voltage using an external resistor network connected to the FB (Feedback) pin.
3. Testing: Before full operation, test the module with a low load to verify correct output voltage and stability.
4. Safety: Always ensure proper insulation and avoid short circuits during installation and testing.
5. Maintenance: Periodically check connections for tightness and inspect for any signs of overheating or damage.

(For reference only)