Details

---

BUY ATF16V8BQL-15JC https://www.utsource.net/itm/p/1869055.html
High- Performance Flash PLD

Parameter	Description	Value
Device	High-Speed CMOS Complex Programmable Logic Device (CPLD)	ATF16V8BQL-15JC
Package	Plastic Quad Flatpack (PQFP)	44-pin
Supply Voltage (VCC)	Operating Supply Voltage	3.3V to 5.0V
Operating Temperature	Industrial Temperature Range	-40°C to +85°C
Clock Frequency	Maximum Clock Frequency	150 MHz
Logic Gates	Equivalent Number of Logic Gates	1,600
Macrocells	Number of Macrocells	8
Input/Output Pins	Number of I/O Pins	32
Programmable Terms	Number of Programmable Terms per Macrocell	16
Power Consumption	Typical Power Consumption at 5V, 150 MHz	200 mW
Programming Voltage	Voltage for In-System Programming	12.75V
Configuration Modes	Modes of Configuration	ISP (In-System Programming), JTAG
Standby Current	Standby Current at 5V	10 μA
Storage Temperature	Storage Temperature Range	-65°C to +150°C
ESD Protection	Electrostatic Discharge Protection	±2 kV HBM (Human Body Model)
Lead Finish	Lead Finish Option	Tin-Lead (Sn/Pb)

Instructions for Use

1. Power Supply:

   • Ensure that the supply voltage (VCC) is within the specified range (3.3V to 5.0V).
   • Connect VCC to the appropriate pins on the device.

2. Grounding:

   • Connect the ground (GND) pin to a stable ground reference.

3. Clock Signal:

   • Apply the clock signal to the appropriate input pin, ensuring it does not exceed the maximum clock frequency of 150 MHz.

4. Input/Output Configuration:

   • Configure the I/O pins as inputs or outputs based on your application requirements.
   • Use the internal pull-up resistors if necessary.

5. Programming:

   • Use the ISP (In-System Programming) mode to program the device in-circuit.
   • Alternatively, use JTAG for boundary-scan testing and programming.
   • Ensure the programming voltage (12.75V) is applied correctly during the programming process.

6. Power Consumption:

   • Monitor the power consumption to ensure it remains within the typical range of 200 mW at 5V and 150 MHz.

7. Temperature Considerations:

   • Operate the device within the industrial temperature range (-40°C to +85°C).
   • Store the device in a temperature-controlled environment (-65°C to +150°C).

8. ESD Handling:

   • Handle the device with care to avoid ESD damage.
   • Use proper ESD protection measures, such as wrist straps and grounded work surfaces.

9. Soldering:

   • Solder the device using a lead-free or tin-lead (Sn/Pb) solder, depending on the lead finish option.
   • Follow recommended soldering profiles to ensure reliable connections.

10. Testing:

    • Perform functional and boundary-scan tests to verify the correct operation of the device.
    • Use the JTAG interface for diagnostic purposes.

By following these instructions, you can ensure the optimal performance and reliability of the ATF16V8BQL-15JC CPLD.

(For reference only)