Details

---

BUY 74F00PC https://www.utsource.net/itm/p/1873583.html
IC GATE NAND 4CH 2-INP 14DIP

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	4.5	5.0	5.5	V
Input High Voltage	VIH	2.0	-	5.5	V
Input Low Voltage	VIL	0.0	-	0.8	V
Output High Voltage	VOH	2.7	3.5	5.0	V
Output Low Voltage	VOL	0.0	0.4	0.5	V
Propagation Delay Time	tpd	-	6	11	ns
Power Consumption (Quiescent)	ICC	-	10	20	μA
Operating Temperature	TOP	-40	-	85	°C

Instructions for Using 74F00PC:

1. Power Supply:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V.
   • Connect the V_CC pin to the positive supply and GND to ground.

2. Input Signals:

   • Apply input signals such that high levels are between 2.0V and 5.5V, and low levels are between 0.0V and 0.8V.
   • Avoid floating inputs; tie them to either V_CC or GND if not in use.

3. Output Signals:

   • The output high level should be between 2.7V and 5.0V, and the output low level should be between 0.0V and 0.5V.
   • Ensure that the load connected to the output does not exceed the maximum current ratings.

4. Propagation Delay:

   • The typical propagation delay time is 6ns, with a maximum of 11ns.
   • This value can vary slightly depending on the operating conditions.

5. Temperature Range:

   • The device is designed to operate within a temperature range of -40°C to 85°C.
   • Ensure that the device is not exposed to temperatures outside this range to avoid damage.

6. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use proper anti-static precautions when handling and storing the device.

7. Mounting:

   • Mount the device on a PCB with appropriate soldering techniques.
   • Ensure good thermal management if the device is expected to dissipate significant power.

8. Testing:

   • Test the device under specified operating conditions to ensure it meets the required performance parameters.
   • Use a digital logic analyzer or oscilloscope to verify signal integrity and timing.

By following these instructions, you can ensure reliable operation of the 74F00PC quad 2-input NAND gate.

(For reference only)