Details

---

BUY 74F08PC https://www.utsource.net/itm/p/1873586.html
IC GATE AND 4CH 2-INP 14DIP

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	4.5	5.0	5.5	V
Input High Voltage	VIH	2.0	-	VCC	V
Input Low Voltage	VIL	0	-	0.8	V
Output High Voltage	VOH	2.4	-	VCC-0.5	V
Output Low Voltage	VOL	0	-	0.4	V
Propagation Delay Time	tpd	-	6	-	ns
Power Dissipation	PD	-	-	100	mW
Operating Temperature	TA	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 5.5V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals such that high levels are at least 2.0V and low levels do not exceed 0.8V.
   • Ensure input signals are within the valid range to avoid damage or incorrect operation.

3. Output Signals:

   • The output high level (V_OH) will be at least 2.4V, and the output low level (V_OL) will not exceed 0.4V.
   • Ensure the load connected to the output does not exceed the maximum power dissipation (P_D) of 100mW.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 6ns. This is the time it takes for the output to respond to a change in the input.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device in a temperature range of -65°C to 150°C.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

7. Mounting:

   • Ensure proper mounting on a PCB with adequate heat dissipation if the device is expected to operate near its maximum power dissipation.
   • Use appropriate soldering techniques to ensure reliable connections.

(For reference only)