Details

---

BUY STR-W6053N https://www.utsource.net/itm/p/1876553.html
Power IC for PWM Type Switching Power Supply with Low Noise and Low Standby Power

Parameter	Description	Value
Part Number	Full Part Number	STR-W6053N
Type	Component Type	Power MOSFET
Packing	Packaging Type	TO-220
Vds (Max)	Drain-Source Voltage	600V
Vgs (Max)	Gate-Source Voltage	±20V
Id (Max)	Continuous Drain Current	53A
Ptot (Max)	Total Power Dissipation	150W
Rds(on) (Max)	On-State Resistance at Vgs = 10V	0.025Ω
Tj (Max)	Junction Temperature	175°C
Tstg	Storage Temperature Range	-55°C to 150°C
Qg (Typ)	Total Gate Charge	180nC
tr (Typ)	Turn-On Time	90ns
tf (Typ)	Turn-Off Time	95ns
Vth (Min/Max)	Threshold Voltage	2V / 4V

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid damage to the leads and body.
   • Avoid exposing the device to excessive static electricity, which can cause damage to the gate oxide.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Use a thermal compound to improve heat dissipation between the device and the heatsink.
   • Tighten the mounting screws to the recommended torque to ensure good thermal contact without damaging the device.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short, low-inductance leads to minimize parasitic inductance.
   • Ensure that the gate drive circuitry provides sufficient voltage and current to switch the MOSFET quickly and efficiently.

4. Thermal Management:

   • The device has a maximum junction temperature of 175°C. Ensure that the heatsink and cooling system are designed to keep the junction temperature within safe limits.
   • Monitor the temperature during operation and adjust the cooling as necessary.

5. Storage:

   • Store the device in a dry, cool place within the temperature range of -55°C to 150°C.
   • Avoid exposure to corrosive environments or high humidity.

6. Testing:

   • Before installing the device in a circuit, test it using a multimeter to ensure that it is not damaged.
   • Verify the continuity between the drain and source with the gate open, and check the gate-to-source resistance.

7. Safety:

   • Always follow safety guidelines when working with high-voltage circuits.
   • Use appropriate personal protective equipment (PPE) such as gloves and safety glasses.

By following these instructions, you can ensure reliable and efficient operation of the STR-W6053N Power MOSFET.

(For reference only)