Details

---

BUY VND5050AK https://www.utsource.net/itm/p/1882392.html
Double channel high side driver with analog current sense for automotive applications

Parameter	Symbol	Min	Typ	Max	Unit	Description
Continuous Drain Current	ID	-	50	-	A	Maximum continuous current through the drain
Peak Pulse Drain Current	IDM	-	100	-	A	Maximum peak pulse current (t < 10 ms)
Drain-Source Breakdown Voltage	BVDSS	50	-	-	V	Maximum voltage from drain to source with gate open
Gate Threshold Voltage	VGS(th)	2.0	4.0	6.0	V	Gate-to-source voltage at which the MOSFET begins to conduct
On-State Resistance	RDS(on)	-	0.035	-	Ω	Drain-to-source resistance when fully on (VGS = 10V, ID = 25A)
Total Power Dissipation	PD	-	125	-	W	Maximum power dissipation
Junction Temperature	TJ	-55	-	150	°C	Operating temperature range for the junction
Storage Temperature	Tstg	-55	-	150	°C	Temperature range for storage
Thermal Resistance, Junction to Case	RθJC	-	0.5	-	°C/W	Thermal resistance from junction to case

Instructions for Use:

1. Handling Precautions:

   • Avoid exposing the VND5050AK to static electricity, as it can damage the device.
   • Handle the component by its body, not the leads, to prevent mechanical stress.

2. Mounting:

   • Ensure proper heat sinking if operating near maximum power dissipation.
   • Use thermal paste between the MOSFET and heat sink for better thermal conductivity.

3. Electrical Connections:

   • Connect the drain (D) to the load or power supply.
   • Connect the source (S) to the ground or return path.
   • Apply the gate (G) voltage relative to the source to control the MOSFET.

4. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure that the gate voltage is within the specified range to avoid damage or improper operation.

5. Storage:

   • Store the VND5050AK in a dry, cool place within the specified storage temperature range.
   • Keep the components in their original packaging until ready for use to protect against static and physical damage.

6. Testing:

   • Use a multimeter to check for continuity and resistance values to ensure the MOSFET is functioning correctly.
   • Perform functional tests under controlled conditions to validate performance.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)