Details

---

BUY PM20CNA060 https://www.utsource.net/itm/p/1886075.html
INTELLIGENT POWER MODULES FLAT-BASE TYPE INSULATED PACKAGE

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	2.7	-	5.5	V
Output Voltage	VOUT	Fixed	-	3.3	-	V
Output Current	IOUT	Continuous	-	600	-	mA
Quiescent Current	IQ	VIN = 5V, VOUT = 3.3V	-	2.5	-	μA
Dropout Voltage	VD	IOUT = 100mA	-	200	-	mV
PSRR		@ 1kHz	-	60	-	dB
Line Regulation		VIN = 2.7V to 5.5V	-	0.2	-	%
Load Regulation		IOUT = 0 to 600mA	-	0.5	-	%

Instructions for PM20CNA060:

1. Power Supply Connection:

   • Connect the input voltage (VIN) within the range of 2.7V to 5.5V.
   • Ensure the output voltage (VOUT) is set to 3.3V.

2. Output Capacitor:

   • Use a minimum of 1μF ceramic capacitor at the output for stability.
   • Place the capacitor as close as possible to the device’s output pin.

3. Input Capacitor:

   • It is recommended to use a 1μF ceramic capacitor at the input.
   • This helps in reducing noise and transient response issues.

4. Heat Dissipation:

   • For applications where the output current is close to the maximum, ensure adequate heat dissipation or heatsinking to prevent overheating.

5. Quiescent Current Consideration:

   • The quiescent current is very low, making this regulator suitable for battery-operated devices.

6. Operating Temperature Range:

   • Ensure that the operating temperature does not exceed the specified limits for reliable operation.

7. Short-Circuit Protection:

   • The device includes internal short-circuit protection, but external fuses may be necessary for robust designs.

8. Installation:

   • Follow standard surface mount technology (SMT) procedures for installation.
   • Verify polarity before soldering to avoid damage to the component.

(For reference only)