Details

---

BUY FSGM300N https://www.utsource.net/itm/p/1898923.html
650V Integrated Power Switch with Abnormal OCP for 30Watt offline flyback converters

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-	-	300	V	Maximum drain-to-source voltage
Gate-Source Voltage	VGS	-15	-	15	V	Maximum gate-to-source voltage
Continuous Drain Current	ID	-	100	-	A	Continuous drain current at TC = 25°C
Pulse Drain Current	IDM	-	200	-	A	Pulse drain current (tp = 10 μs)
Power Dissipation	PTOT	-	-	300	W	Total power dissipation
Junction Temperature	TJ	-	-	175	°C	Maximum junction temperature
Storage Temperature	TSTG	-55	-	150	°C	Operating storage temperature range

Instructions for Use:

1. Handling Precautions:

   • Avoid exposing the device to temperatures outside the specified operating range.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure proper thermal management by using a heatsink if necessary.
   • Follow recommended PCB layout guidelines to minimize parasitic inductance and resistance.

3. Biasing:

   • Apply the gate voltage carefully to avoid exceeding the maximum ratings.
   • Use a gate resistor to limit the gate current and prevent oscillations.

4. Operation:

   • Monitor the junction temperature to ensure it does not exceed 175°C.
   • Ensure the drain current does not exceed the continuous or pulse ratings for extended periods.

5. Testing:

   • Perform initial testing with reduced voltages and currents to verify correct operation.
   • Use appropriate test equipment to measure key parameters such as V_DS, I_D, and T_J.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against moisture and static damage.

(For reference only)