Details

---

BUY DS1225AB-150 https://www.utsource.net/itm/p/1900526.html
IC NVSRAM 64K PARALLEL 28EDIP

Parameter	Symbol	Min	Typ	Max	Unit
Operating Voltage	Vcc	4.75	5	5.25	V
Output Current (per output)	Iout	-	25	60	mA
Output Voltage (per output)	Vout	0	-	5	V
Standby Current	Isb	-	1	5	μA
Operating Temperature	Topr	-40	-	85	°C
Storage Temperature	Tstg	-65	-	150	°C

Instructions for DS1225AB-150

1. Power Supply:

   • Ensure the operating voltage is within the range of 4.75V to 5.25V.
   • Use a stable power supply to avoid fluctuations that could affect performance.

2. Output Configuration:

   • The DS1225AB-150 can drive up to 60mA per output, but it is recommended to stay below 25mA for optimal performance.
   • Ensure the load connected to each output does not exceed the maximum current rating.

3. Standby Mode:

   • The device has a low standby current of 1μA to 5μA, which helps in reducing power consumption when not in use.
   • To enter standby mode, set the appropriate control signals as specified in the datasheet.

4. Temperature Considerations:

   • The operating temperature range is from -40°C to 85°C.
   • The storage temperature range is from -65°C to 150°C.
   • Avoid exposing the device to temperatures outside these ranges to prevent damage.

5. Handling and Installation:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure reliable connections and prevent thermal damage.

6. Testing and Verification:

   • After installation, verify the output voltages and currents to ensure they are within the specified limits.
   • Perform functional tests to confirm the device operates correctly under all intended conditions.

7. Compliance and Standards:

   • Ensure the device complies with relevant safety and regulatory standards for your application.
   • Refer to the datasheet for specific compliance information and certifications.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)