Details

---

BUY 74ACT825SPC https://www.utsource.net/itm/p/1909737.html
8-Bit D-Type Flip-Flop

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.0	-	5.5	V
Output High Voltage	VOH	-	2.4	5.0	V	IOL = -4 mA, VCC = 5.0V
Output Low Voltage	VOL	0.0	0.1	0.4	V	IOL = 16 mA, VCC = 5.0V
Input High Voltage	VIH	2.0	-	5.5	V	VCC = 5.0V
Input Low Voltage	VIL	0.0	-	0.8	V	VCC = 5.0V
Propagation Delay Time	tpd	2.5	-	4.5	ns	VCC = 5.0V, TA = 25°C
Power Dissipation	PD	-	-	390	mW	VCC = 5.0V
Operating Temperature	TA	-40	-	125	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Input signals should be within the specified input voltage levels (V_IH and V_IL).
   • Avoid applying voltages outside the supply voltage range to any input pins.

3. Output Signals:

   • The output high (V_OH) and output low (V_OL) voltages are dependent on the load current.
   • Ensure the load current does not exceed the maximum ratings to avoid damage.

4. Propagation Delay:

   • The propagation delay time (t_pd) is critical for timing considerations in your circuit design.
   • Ensure that the delay is accounted for in your timing diagrams.

5. Temperature Considerations:

   • The device is designed to operate within the temperature range of -40°C to 125°C.
   • Store the device in a temperature range of -65°C to 150°C to prevent damage.

6. Handling:

   • Handle the device with care to avoid static discharge.
   • Follow proper ESD (Electrostatic Discharge) handling procedures.

7. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress on the device.
   • Use a heat sink if necessary to manage power dissipation.

8. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified parameters.
   • Use appropriate test equipment and methods to verify performance.

By following these guidelines, you can ensure reliable operation of the 74ACT825SPC in your application.

(For reference only)