Details

---

BUY FGC1500A-130DS https://www.utsource.net/itm/p/2140630.html
POWER INVERTER USE PRESS PACK TYPE

Parameter	Value	Unit
Type	Fixed Gain Amplifier	-
Model	FGC1500A-130DS	-
Frequency Range	1300	MHz
Gain	40	dB
Noise Figure	2.5	dB
Input VSWR	1.5:1	-
Output VSWR	1.5:1	-
Input Power (Max)	+20	dBm
Supply Voltage	+12 to +15	V
Supply Current	120	mA
Operating Temperature	-40 to +85	°C
Storage Temperature	-55 to +100	°C
Package Type	Surface Mount	-
Dimensions	19.0 x 19.0 x 4.7	mm

Instructions for Use:

1. Power Supply:

   • Connect the supply voltage between +12V and +15V to the Vcc pin.
   • Ensure the ground connection is secure to the GND pin.

2. Input and Output Connections:

   • Connect the RF input signal to the IN pin.
   • Connect the load or next stage to the OUT pin.
   • Use 50 Ohm impedance matching for optimal performance.

3. Heat Dissipation:

   • Ensure adequate heat dissipation by mounting the amplifier on a heatsink or a PCB with sufficient copper area.

4. Handling:

   • Handle the device with care to avoid damage from static electricity.
   • Use appropriate ESD protection measures during handling and installation.

5. Testing:

   • Before connecting to the main circuit, test the amplifier using a signal generator and spectrum analyzer to verify gain and noise figure.
   • Ensure all connections are correct and secure before applying power.

6. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range to prevent damage.

7. Troubleshooting:

   • If the amplifier does not function as expected, check the power supply, input/output connections, and ensure the device is not overheating.
   • Refer to the datasheet for more detailed troubleshooting steps and specifications.

(For reference only)