Details

---

BUY FS100R12KS4 https://www.utsource.net/itm/p/2167253.html
Insulated Gate Bipolar Transistor, 130A I(C), 1200V V(BR)CES, N-Channel, MODULE-39

Parameter	Symbol	Min	Typical	Max	Unit	Conditions/Notes
Forward Voltage	VF	-	1.8	2.3	V	@ IF = 25A, Tj = 25°C
Reverse Recovery Time	trr	-	120	150	ns	@ IR = 25A, Tj = 25°C
Reverse Recovery Charge	Qrr	-	200	250	nC	@ IR = 25A, Tj = 25°C
Reverse Breakdown Voltage	VBR	1200	-	-	V	@ IR = 1mA, Tj = 25°C
Thermal Resistance	Rth(j-c)	-	0.1	0.15	K/W	Junction to Case
Maximum Junction Temperature	Tj(max)	-	-	175	°C
Storage Temperature	Tstg	-55	-	150	°C
Operating Temperature	Top	-40	-	125	°C

Instructions:

1. Handling and Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle the device with care to avoid mechanical stress or damage.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Use appropriate torque when mounting the device to the heatsink to ensure good thermal contact.

3. Electrical Connections:

   • Connect the device according to the datasheet pinout diagram.
   • Use short, low-inductance leads for high-frequency applications to minimize parasitic effects.

4. Reverse Voltage Application:

   • Do not exceed the maximum reverse breakdown voltage (V_BR) to prevent device failure.
   • Ensure that the reverse voltage is applied slowly to avoid transient overvoltage conditions.

5. Forward Current:

   • Limit the forward current (I_F) to the maximum rated value to prevent overheating and potential damage.
   • Consider derating the forward current at higher temperatures to ensure reliable operation.

6. Thermal Management:

   • Monitor the junction temperature (T_j) during operation to ensure it remains below the maximum allowed value.
   • Use thermal simulation tools to optimize the thermal design if necessary.

7. Testing and Validation:

   • Perform thorough testing under actual operating conditions to validate the device performance.
   • Follow the recommended test procedures outlined in the datasheet for accurate results.

(For reference only)