Details

---

BUY CHL8510CRT https://www.utsource.net/itm/p/4315591.html
12V High Performance Gate Driver

Parameter	Description	Value
Part Number	Component Identifier	CHL8510CRT
Type	Device Type	Ceramic Capacitor
Capacitance	Nominal Capacitance	100 pF
Tolerance	Capacitance Tolerance	±5%
Voltage Rating	Maximum DC Voltage	50 V
Temperature Coefficient	Change in Capacitance with Temperature	NPO (0 ±30 ppm/°C)
Operating Temperature Range	Temperature Range for Normal Operation	-55°C to +125°C
Case Size	Physical Dimensions	0805 (2.0 x 1.25 mm)
Termination	End Finish	Tin-Silver-Copper (SnAgCu)
Insulation Resistance	Minimum Insulation Resistance at 25°C	1000 MΩ
Dissipation Factor	Maximum Dissipation Factor at 1 kHz, 25°C	0.1%
RoHS Compliance	Compliance with Restriction of Hazardous Substances Directive	Yes
Package Quantity	Number of Components per Package	1000

Instructions for Use

1. Handling and Storage:

   • Store in a dry environment to prevent moisture damage.
   • Handle with care to avoid mechanical stress on the ceramic body.

2. Soldering:

   • Preheat components to 70°C to 90°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be limited to 10 seconds per joint.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the capacitor on the PCB ensuring proper orientation (if applicable).
   • Secure the capacitor using a clamp or holder during soldering to prevent movement.

4. Testing:

   • Test the capacitance and insulation resistance after assembly to ensure proper functioning.
   • Use a non-destructive testing method to avoid damaging the component.

5. Environmental Considerations:

   • Avoid exposure to corrosive environments.
   • Ensure the operating temperature does not exceed the specified range to prevent degradation.

6. Disposal:

   • Dispose of the component in accordance with local environmental regulations.

(For reference only)