Details

---

BUY DS1245Y-100+ https://www.utsource.net/itm/p/4368136.html
NVRAM NVSRAM Parallel 1Mbit 5V 32-Pin EDIP

Parameter	Description	Value	Unit
Operating Voltage (Vcc)	Supply voltage range	3.0 to 5.5	V
Output Current	Maximum output current per channel	±100	mA
Number of Channels	Number of independent channels	8	-
Channel Resistance	On-state resistance per channel	1.6	Ω
Operating Temperature	Range of temperatures for operation	-40 to +85	°C
Storage Temperature	Range of temperatures for storage	-65 to +150	°C
Package Type	Type of package	SOIC-16	-
Lead Finish	Surface finish of the leads	Tin/Lead (SnPb)	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of 3.0V to 5.5V.
   • Connect the Vcc pin to the positive supply and GND to the ground.

2. Channel Configuration:

   • Each of the 8 channels can be configured as either a source or sink.
   • Set the direction of each channel using the appropriate control signals.

3. Current Limiting:

   • Do not exceed the maximum output current of ±100mA per channel.
   • Use external resistors if necessary to limit the current to safe levels.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high currents or temperatures.
   • Consider using a heatsink if the device is expected to operate near its maximum temperature limits.

5. Storage and Handling:

   • Store the device in a dry, cool environment within the specified storage temperature range.
   • Handle with care to avoid damage to the leads and package.

6. Soldering:

   • Use a soldering iron with a temperature not exceeding 300°C.
   • Avoid excessive heating during soldering to prevent damage to the device.

7. Testing:

   • After assembly, test each channel individually to ensure proper functionality.
   • Verify that the output current and voltage levels are within the expected ranges.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)