Details

---

BUY EPF8282ATC100-4N https://www.utsource.net/itm/p/4418157.html
FLEX 8000A FPGA 2.5K 100-TQFP

Parameter	Description	Value
Device Type	Programmable Logic Device (PLD)
Family	MAX 7000S
Part Number	EPF8282ATC100-4N
Package	TQFP (100-pin)
Speed Grade	-4
Logic Cells	2820
I/O Pins	96
Internal RAM (bits)	2560
Maximum Frequency	167 MHz
Supply Voltage (Vcc)	3.3V
Operating Temperature	-40°C to +85°C
Configuration Method	ISP (In-System Programming), JTAG
Programming Voltage	3.3V
Configuration Memory	Non-volatile Flash
Power Consumption	Static: 10 mW, Dynamic: 100 mW at 100 MHz
Package Dimensions	14 mm x 14 mm x 1.4 mm

Instructions for Use

1. Power Supply Connections:

   • Connect Vcc (3.3V) to all Vcc pins.
   • Connect GND to all GND pins.

2. Configuration:

   • Use ISP or JTAG for programming.
   • Ensure the configuration memory is properly programmed before operation.

3. Signal Levels:

   • All I/O pins operate at 3.3V logic levels.
   • Ensure proper signal integrity and termination for high-speed signals.

4. Thermal Management:

   • The device operates within the specified temperature range (-40°C to +85°C).
   • Ensure adequate cooling if operating at high temperatures or high power consumption.

5. Handling:

   • Handle with care to avoid static discharge.
   • Follow ESD (Electrostatic Discharge) guidelines during handling and installation.

6. Testing:

   • Verify the configuration and functionality using boundary scan (JTAG) testing.
   • Perform functional tests under typical operating conditions.

7. Storage:

   • Store in a dry, cool environment to prevent moisture damage.
   • Use anti-static bags for long-term storage.

8. Documentation:

   • Refer to the datasheet and application notes for detailed information on device specifications and usage.

For more detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)