Details

---

BUY FAN3223TMX https://www.utsource.net/itm/p/4445903.html
Dual 4A High-Speed, Low-Side Gate Drivers

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Supply Voltage	Vcc	4.5	-	20	V
Gate Drive Output Current	IOH	-	1.5	3	A	Vcc = 15V, RL = 5Ω
Gate Drive Sink Current	IOL	-3	-1.5	-	A	Vcc = 15V, RL = 5Ω
Input High Level Voltage	VIH	2	-	20	V
Input Low Level Voltage	VIL	0	-	0.8	V
Propagation Delay Time	tpd	25	-	65	ns	Vcc = 15V, RL = 5Ω, CL = 100pF
Rise Time	tr	25	-	65	ns	Vcc = 15V, RL = 5Ω, CL = 100pF
Fall Time	tf	25	-	65	ns	Vcc = 15V, RL = 5Ω, CL = 100pF
Operating Temperature	Toper	-40	-	125	°C
Storage Temperature	Tstg	-65	-	150	°C

Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 20V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Gate Drive Current:

   • The FAN3223TMX can source up to 3A and sink up to -3A.
   • Use appropriate load resistors (RL) to match the current requirements of your application.

3. Input Voltage Levels:

   • For reliable operation, ensure the input high level (VIH) is at least 2V and the input low level (VIL) is no more than 0.8V.

4. Propagation Delay, Rise, and Fall Times:

   • These parameters are critical for timing considerations in your circuit.
   • Ensure that the propagation delay, rise time, and fall time meet the requirements of your system.

5. Temperature Considerations:

   • The operating temperature range is from -40°C to 125°C.
   • Store the device in an environment with temperatures between -65°C and 150°C.

6. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store in a dry, cool place to prevent moisture damage.

7. PCB Layout:

   • Use proper PCB layout techniques to minimize noise and ensure stable performance.
   • Keep power and ground planes as wide as possible to reduce impedance.

8. Testing:

   • Before deploying the device in a final application, thoroughly test it under all expected operating conditions to ensure reliability.

9. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your specific application.

(For reference only)