Details

---

BUY HIP2100IBZT https://www.utsource.net/itm/p/4517104.html
DRIVER HALF BRDG 100V 8-SOIC

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	14	V	Operating input voltage range
Output Voltage	VOUT	-	5.0	-	V	Regulated output voltage (fixed)
Output Current	IOUT	-	3.0	3.5	A	Maximum continuous output current
Quiescent Current	IQ	-	1.5	2.5	mA	Quiescent current at no load
Dropout Voltage	VDROP	-	0.4	0.8	V	Dropout voltage at IOUT = 3.0A
Efficiency	η	-	90	-	%	Typical efficiency at nominal conditions
Thermal Shutdown Temperature	TSD	-	160	-	°C	Thermal shutdown temperature
Operating Junction Temperature	TJ	-40	-	125	°C	Operating junction temperature range
Storage Temperature	TSTORAGE	-40	-	150	°C	Storage temperature range

Instructions for Use

1. Input Connection:

   • Connect the input voltage (V_IN) to the input pin of the HIP2100IBZT.
   • Ensure the input voltage is within the specified range (4.5V to 14V).

2. Output Connection:

   • Connect the output pin to the load requiring a regulated 5V supply.
   • The maximum continuous output current is 3.5A.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the system.

4. Capacitors:

   • Place a 10μF ceramic capacitor between the input pin and ground to filter input noise.
   • Place a 10μF ceramic capacitor between the output pin and ground to stabilize the output voltage.

5. Thermal Management:

   • Ensure adequate heat dissipation, especially when operating at high output currents.
   • The device has a thermal shutdown feature to protect against overheating, but it should not be relied upon as the primary thermal management method.

6. Efficiency:

   • The device is designed for high efficiency, typically around 90% under nominal conditions.
   • Monitor the efficiency to ensure optimal performance.

7. Operating Conditions:

   • The operating junction temperature range is from -40°C to 125°C.
   • The storage temperature range is from -40°C to 150°C.

8. Thermal Shutdown:

   • The device will shut down if the junction temperature exceeds 160°C.
   • Allow the device to cool before resuming operation.

9. Dropout Voltage:

   • The dropout voltage is the minimum difference between the input and output voltages required to maintain regulation.
   • At a typical output current of 3.0A, the dropout voltage is around 0.4V to 0.8V.

10. Quiescent Current:

    • The quiescent current is the current consumed by the device when no load is connected.
    • It is typically around 1.5mA to 2.5mA.

(For reference only)