Details

---

BUY MC33364DR2G https://www.utsource.net/itm/p/4671271.html
Critical Conduction GreenLine TM SMPS Controller

Parameter	Description	Min	Typ	Max	Unit
Input Voltage (VIN)	Operating voltage range	8.5	-	72	V
Output Current (IOUT)	Continuous output current	-	100	150	mA
Dropout Voltage (VDO)	Voltage difference between VIN and VOUT for regulation	-	1.2	-	V
Quiescent Current (IQ)	Current consumed by the regulator when no load is applied	-	10	-	mA
Thermal Shutdown Temperature (TSD)	Temperature at which the device shuts down to prevent damage	-	-	160	°C
Protection Features	Built-in protection mechanisms	Overcurrent, Overtemperature	-	-	-
Operating Temperature Range (TA)	Ambient temperature range for operation	-40	-	125	°C
Storage Temperature Range (TSTG)	Temperature range for storage	-65	-	150	°C

Instructions for Using MC33364DR2G

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the positive terminal of the power supply.
   • Ensure the input voltage is within the specified operating range (8.5V to 72V).

2. Output Connection:

   • Connect the output (VOUT) to the load or circuit requiring regulated power.
   • The maximum continuous output current should not exceed 150mA.

3. Ground Connection:

   • Ensure a common ground connection between the input and output circuits.

4. Capacitors:

   • Place a 1μF ceramic capacitor close to the input pin to stabilize the input voltage.
   • Place a 1μF ceramic capacitor close to the output pin to stabilize the output voltage.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum output current or in high ambient temperatures.
   • Use a heatsink if necessary to keep the junction temperature below the thermal shutdown threshold (160°C).

6. Protection:

   • The device includes built-in overcurrent and overtemperature protection.
   • Do not bypass these protections as they are crucial for preventing damage to the device.

7. Storage:

   • Store the device in a dry environment within the specified storage temperature range (-65°C to 150°C).

8. Handling:

   • Handle with care to avoid static discharge, which can damage the device.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

9. Testing:

   • Before connecting to the final application, test the device with a known load to ensure proper regulation and stability.

(For reference only)