Details

---

BUY MC74HC132ADTR2 https://www.utsource.net/itm/p/4680174.html
2& #8722 ; Input NAND Gate with Schmitt & #8722 ; Trigger Inputs High& #8722 ; Performance Silicon & #8722 ;Gate CMOS

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.0	-	6.0	V	-
Input Low Voltage	VIL	0.3 * VCC	-	-	V	-
Input High Voltage	VIH	-	-	0.7 * VCC	V	-
Output Low Voltage	VOL	0.1	-	0.4	V	IOL = 4 mA, VCC = 4.5 to 5.5 V
Output High Voltage	VOH	2.4	-	VCC - 0.4	V	IOH = -4 mA, VCC = 4.5 to 5.5 V
Input Leakage Current	IIL	-1	-	1	μA	VCC = 4.5 to 5.5 V
Output Leakage Current	IOL	-1	-	1	μA	VCC = 4.5 to 5.5 V
Propagation Delay Time	tpd	6	-	18	ns	VCC = 4.5 to 5.5 V, TA = 25°C
Power Dissipation	PD	-	-	100	mW	Per Package
Operating Temperature Range	TA	-40	-	85	°C	-

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0 V to 6.0 V.
   • Connect the V_CC pin to the positive power supply and the GND pin to the ground.

2. Input Levels:

   • Inputs should be driven to either a low level (V_IL) or a high level (V_IH).
   • V_IL should be less than 0.3 * V_CC.
   • V_IH should be greater than 0.7 * V_CC.

3. Output Levels:

   • The output will be low (V_OL) when the input conditions are met for a low output.
   • The output will be high (V_OH) when the input conditions are met for a high output.
   • Ensure that the load connected to the output does not exceed the maximum current ratings.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for the output to change state after the input changes.
   • This value can vary with temperature and supply voltage, but typical values are provided for V_CC = 4.5 to 5.5 V and T_A = 25°C.

5. Power Dissipation:

   • The maximum power dissipation per package is 100 mW. Ensure that the device is not operated beyond this limit to avoid overheating and potential damage.

6. Operating Temperature:

   • The device is designed to operate within the temperature range of -40°C to 85°C. Ensure that the operating environment does not exceed these limits.

7. Handling Precautions:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures.
   • Do not exceed the absolute maximum ratings specified in the datasheet.

By following these parameters and instructions, you can ensure reliable operation of the MC74HC132ADTR2.

(For reference only)