Details

---

BUY LTC1563-3CGN#PBF https://www.utsource.net/itm/p/4811113.html
IC FILTER 256KHZ LOWPASS 16SSOP

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	2.7	-	5.5	V
Operating Temperature Range	Toper	-40	-	85	°C
Storage Temperature Range	Tstg	-65	-	150	°C
Input Voltage Range	VIN	0	-	VCC	V
Output Voltage Range	VOUT	0	-	VCC	V
Quiescent Current	IQ	-	200	-	μA
Shutdown Current	ISD	-	1	-	μA
Output Voltage Accuracy	ΔVOUT	-	±0.5%	-	%
Bandwidth (Small Signal)	fBW	-	10	-	MHz
Settling Time (10-bit)	tSETTLE	-	200	-	ns
Package Type		-	8-lead	-	SOIC

Instructions for Use:

1. Supply Voltage (VCC):

   • The device operates within a supply voltage range of 2.7V to 5.5V. Ensure that the power supply is stable and within this range to avoid damage or incorrect operation.

2. Operating Temperature:

   • The operating temperature range is from -40°C to 85°C. Avoid exposing the device to temperatures outside this range during operation.

3. Storage Temperature:

   • Store the device in an environment where the temperature ranges from -65°C to 150°C to prevent damage.

4. Input Voltage Range (VIN):

   • The input voltage should be between 0V and the supply voltage (VCC). Exceeding these limits can cause damage to the device.

5. Output Voltage Range (VOUT):

   • The output voltage will be between 0V and the supply voltage (VCC). Ensure that the load connected to the output can handle this range.

6. Quiescent Current (IQ):

   • The quiescent current is typically 200 μA. This value should be considered when designing the power supply circuit to ensure efficient operation.

7. Shutdown Current (ISD):

   • When the device is in shutdown mode, the current consumption is typically 1 μA. Use this feature to conserve power when the device is not in use.

8. Output Voltage Accuracy (ΔVOUT):

   • The output voltage accuracy is ±0.5%. This ensures that the output voltage is precise and reliable.

9. Bandwidth (fBW):

   • The small-signal bandwidth is 10 MHz. This parameter is important for applications requiring high-speed signal processing.

10. Settling Time (tSETTLE):

    • The settling time for a 10-bit resolution is 200 ns. This is the time it takes for the output to stabilize after a change in input.

11. Package Type:

    • The device is available in an 8-lead SOIC package. Follow standard surface mount technology (SMT) procedures for assembly and soldering.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Ensure proper decoupling capacitors are used to maintain stability and reduce noise.
• For optimal performance, follow the recommended layout and PCB design guidelines provided in the datasheet.

(For reference only)