Details

---

BUY M25P128-VMF6PB https://www.utsource.net/itm/p/4826279.html
IC FLASH 128M SPI 54MHZ 16SO W

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	3.6	V
Standby Current	ICC(STANDBY)	VCC = 3.0V	-	1.0	-	μA
Active Current	ICC(ACTIVE)	VCC = 3.0V, 10 MHz	-	4.0	-	mA
Page Program Time	tPP	-	-	5	-	ms
Sector Erase Time	tSE	-	-	300	-	ms
Chip Erase Time	tCE	-	-	30	-	s
Data Retention	-	-	20	-	-	years
Operating Temperature	TOP	Commercial Grade	-40	-	85	°C
Industrial Temperature	TIND	Industrial Grade	-40	-	125	°C
Storage Temperature	TSTG	-	-65	-	150	°C
Write Protect Pin Current	IWP	VCC = 3.0V, WP = VCC	-	1.0	-	μA
Output High Level	VOH	VCC = 3.0V, IOL = 100 μA	2.4	-	-	V
Output Low Level	VOL	VCC = 3.0V, IOH = -400 μA	-	-	0.4	V

Instructions for Using M25P128-VMF6PB

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 3.6V.
   • The device operates with a typical standby current of 1.0 μA and active current of 4.0 mA at 3.0V.

2. Programming and Erasing:

   • Page Program Time: It takes approximately 5 ms to program a page.
   • Sector Erase Time: It takes approximately 300 ms to erase a sector.
   • Chip Erase Time: It takes approximately 30 seconds to erase the entire chip.

3. Temperature Considerations:

   • Operating Temperature: The device can operate in commercial grade (-40°C to 85°C) and industrial grade (-40°C to 125°C) environments.
   • Storage Temperature: The device can be stored between -65°C and 150°C.

4. Data Retention:

   • The device retains data for up to 20 years under normal operating conditions.

5. Write Protect Pin:

   • The write protect pin (WP) should be set to V_CC to enable protection. The current through this pin should not exceed 1.0 μA.

6. Output Levels:

   • Ensure that the output high level (V_OH) is at least 2.4V when the output low level (V_OL) is no more than 0.4V.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow proper soldering techniques to ensure reliable connections.

8. Package Information:

   • The M25P128-VMF6PB is typically available in a standard package suitable for surface mount technology (SMT).

For detailed application notes and specific commands, refer to the datasheet provided by the manufacturer.

(For reference only)