Details

---

BUY SN7406DG4 https://www.utsource.net/itm/p/5175521.html
HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Operating Supply Voltage	VCC	-	5.0	5.25	V
Input Low Voltage	VIL	-	0.8	1.5	V	VCC = 5V
Input High Voltage	VIH	2.0	3.5	5.0	V	VCC = 5V
Output Low Voltage	VOL	-	0.4	0.5	V	IOL = 16mA, VCC = 5V
Output High Voltage	VOH	2.7	3.0	5.0	V	IOH = -0.4mA, VCC = 5V
Propagation Delay Time	tpd	-	22	34	ns	VCC = 5V, TA = 25°C
Power Dissipation	PD	-	-	500	mW	Per Package
Operating Temperature	TA	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals that comply with the input voltage levels (V_IL and V_IH).
   • Avoid exceeding the maximum input voltage (V_IH) to prevent damage.

3. Output Signals:

   • The output low voltage (V_OL) should be suitable for driving low-level inputs.
   • The output high voltage (V_OH) should be sufficient for driving high-level inputs.

4. Propagation Delay:

   • Consider the propagation delay time (t_pd) when designing timing-sensitive circuits.

5. Thermal Management:

   • Ensure adequate cooling if operating near the maximum power dissipation (P_D).
   • Operate within the specified temperature range (T_A) to avoid thermal stress.

6. Storage:

   • Store the device in a controlled environment within the storage temperature range (T_STG).

7. Handling:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)