Details

---

BUY XCS10XL-4VQG100C https://www.utsource.net/itm/p/5413481.html
SPARTAN-XL FPGA 10K 100-VQFP

Parameter	Description	Value
Part Number	Full Part Number	XCS10XL-4VQG100C
Device Type	Type of Device	FPGA (Field-Programmable Gate Array)
Family	Device Family	Spartan-XL
Density	Logic Cells	10,000
Package	Package Type	VQG100 (100-pin Very Thin Quad Flat Pack)
Voltage Range	Operating Voltage	3.3V ± 5%
I/O Banks	Number of I/O Banks	4
I/O Pins	Total I/O Pins	78
Configuration Modes	Supported Configuration Modes	Master, Slave, Boundary Scan
Configuration Memory	Configuration Memory Type	External PROM or Flash
Clock Resources	Dedicated Clock Inputs	2
Temperature Range	Operating Temperature	-40°C to +85°C
Power Consumption	Typical Power Consumption	0.5W (static), 1.5W (dynamic)
Programming Interface	JTAG Support	Yes
Data Rate	Maximum Data Rate	200 Mbps
Package Pitch	Pin Pitch	0.5 mm
Thermal Resistance	Junction-to-Ambient Thermal Resistance	45°C/W

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (3.3V ± 5%).
   • Use appropriate decoupling capacitors near the power pins to minimize noise.

2. Configuration:

   • Program the FPGA using an external PROM or Flash memory.
   • Use JTAG interface for boundary scan testing and programming.
   • Follow the configuration modes (Master, Slave, Boundary Scan) as per your application requirements.

3. Signal Integrity:

   • Keep signal traces short and direct to reduce noise and crosstalk.
   • Use controlled impedance lines for high-speed signals to maintain signal integrity.

4. Thermal Management:

   • Ensure adequate cooling, especially for high dynamic power consumption applications.
   • Consider heatsinks or forced air cooling if operating at the upper temperature limit.

5. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Store in ESD-protected packaging when not in use.

6. Testing:

   • Perform initial testing with simple configurations to verify basic functionality.
   • Use boundary scan features for thorough testing and diagnosis.

7. Documentation:

   • Refer to the Spartan-XL datasheet and user guide for detailed information on device features, programming, and application notes.

(For reference only)