Details

---

BUY AS19-H1F https://www.utsource.net/itm/p/5434516.html

Parameter	Description	Value
Part Number	Unique identifier for the component	AS19-H1F
Type	Category of the device	Relay
Coil Voltage	Voltage required to activate the relay coil	12V DC
Coil Current	Current drawn by the coil when activated	40mA max
Contact Form	Configuration of the relay contacts	SPDT (Single Pole, Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Voltage	Maximum voltage across which insulation is guaranteed	2500V AC
Operating Temp.	Temperature range in which the relay can operate	-40°C to +85°C
Mechanical Life	Expected number of operations before failure	10 million cycles
Electrical Life	Expected number of operations under load before failure	100 thousand cycles
Weight	Mass of the relay	30g

Instructions for Use:

1. Installation: Ensure the relay is mounted on a flat surface with adequate ventilation to prevent overheating.
2. Connection: Connect the coil terminals to the appropriate power supply matching the specified coil voltage. Connect the common (COM), normally open (NO), and normally closed (NC) terminals according to your circuit requirements.
3. Operation: Apply the specified coil voltage to activate the relay. The NO contact will close, and the NC contact will open when the coil is energized.
4. Maintenance: Periodically inspect connections and mounting hardware to ensure reliability. Avoid exposure to moisture and corrosive environments.
5. Disposal: Follow local regulations for disposal of electronic components.

(For reference only)