Details

---

BUY CM100RX-24A https://www.utsource.net/itm/p/5550419.html
IGBT MODULES HIGH POWER SWITCHING USE

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	VIN	85	-	264	VAC	-
Output Voltage	VOUT	-	24	-	VDC	±5%
Output Current	IOUT	-	4.17	-	A	-
Efficiency	η	-	90	-	%	-
Power Factor	PF	-	0.9	-	-	-
No-Load Consumption	PNL	-	0.3	-	W	-
Ripple & Noise	VRN	-	50	-	mVp-p	-
Operating Temperature	TOP	-40	-	85	°C	-
Storage Temperature	TST	-40	-	100	°C	-
Humidity	RH	-	90	-	%	Non-condensing
Protection Features	-	-	-	-	-	Overvoltage, Overcurrent, Short Circuit
MTBF (Mean Time Between Failures)	-	-	100,000	-	Hours	-

Instructions for Use:

1. Installation:

   • Ensure the power supply is installed in a well-ventilated area to prevent overheating.
   • Secure the power supply to the mounting surface using the provided screws.

2. Connection:

   • Connect the input terminals to the AC power source.
   • Connect the output terminals to the load or device being powered.

3. Operation:

   • Turn on the AC power source to start the power supply.
   • Monitor the output voltage and current to ensure they are within the specified range.

4. Maintenance:

   • Regularly inspect the power supply for any signs of damage or wear.
   • Clean the power supply with a dry cloth to remove dust and debris.

5. Troubleshooting:

   • If the power supply fails to start, check the input voltage and connections.
   • If the output voltage is out of range, verify the load and adjust if necessary.
   • If the power supply overheats, ensure proper ventilation and reduce the load.

6. Safety Precautions:

   • Do not operate the power supply in environments with high humidity or condensation.
   • Do not short-circuit the output terminals.
   • Disconnect the power supply from the AC source before performing any maintenance or repairs.

(For reference only)