Details

---

BUY AD2S1200YSTZ https://www.utsource.net/itm/p/5650608.html
CONV R/D 12-BIT W/OSC 44-LQFP

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VDD	4.75	5.0	5.25	V	Operating supply voltage
Supply Current	IDD	-	180	-	mA	Supply current at 5V, 100kSPS
Analog Input Range	VIN	-	±2.5	-	V	Differential input range
Output Data Rate	fOUT	10	-	100	kSPS	Maximum output data rate
Resolution	N	-	12/16	-	bits	Selectable resolution
Phase Error	ΦERR	-	0.1	-	°	Maximum phase error at 100kSPS
Amplitude Error	AERR	-	0.05	-	%	Maximum amplitude error at 100kSPS
Common Mode Rejection Ratio	CMRR	80	-	-	dB	Minimum common mode rejection ratio
Power-Down Current	IDD PD	-	5	-	μA	Supply current in power-down mode
Operating Temperature Range	Toper	-40	-	85	°C	Operating temperature range
Storage Temperature Range	Tstg	-65	-	150	°C	Storage temperature range

Instructions for Using AD2S1200YSTZ

1. Power Supply:

   • Connect the VDD pin to a stable 5V power supply.
   • Ensure the power supply can provide up to 180mA of current.

2. Analog Input:

   • Connect the differential analog input signals (VIN+ and VIN-) to the appropriate pins.
   • The input range is ±2.5V. Ensure the input signals do not exceed this range to avoid damage.

3. Output Configuration:

   • Set the desired resolution (12-bit or 16-bit) using the configuration pins.
   • The output data rate can be set up to 100kSPS.

4. Data Output:

   • Read the digital output from the serial data output pin (SDO).
   • Use the serial clock (SCLK) and frame sync (FSYNC) signals to synchronize data transfer.

5. Power-Down Mode:

   • To enter power-down mode, set the power-down control pin (PDN) high.
   • In power-down mode, the supply current drops to approximately 5μA.

6. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C.
   • Store the device in an environment between -65°C and +150°C.

7. Common Mode Rejection:

   • Ensure that the common mode voltage of the input signals is within the specified range to achieve the best CMRR performance.

8. Testing and Validation:

   • After initial setup, perform tests to validate the phase and amplitude errors.
   • Use a known reference signal to ensure the device is operating within specifications.

9. Handling and Storage:

   • Handle the device with care to avoid static discharge.
   • Store the device in a dry, cool place to prevent moisture damage.

For more detailed information, refer to the datasheet provided by Analog Devices.

(For reference only)