Details

---

BUY PS21964 https://www.utsource.net/itm/p/5824522.html
Intellimod? Module Dual-In-Line Intelligent Power Module 15 Amperes/600 Volts

Parameter	Description	Value
Device	High-Voltage Bidirectional Switch	PS21964
Supply Voltage	Operating voltage range	2.5V to 5.5V
Channel Type	Bidirectional	-
Continuous Current	Maximum continuous current through the switch	±1A
Peak Current	Maximum peak current through the switch	±2A
On-Resistance	Typical on-resistance at VDD = 5V	0.5Ω
Capacitance	Input/output capacitance	20pF
Operating Temperature	Temperature range for operation	-40°C to 85°C
Storage Temperature	Temperature range for storage	-65°C to 150°C
Package	Package type	SOT-23
Pin Count	Number of pins	6

Instructions for Use:

1. Power Supply Connection:

   • Connect V_DD to the positive supply voltage (2.5V to 5.5V).
   • Connect GND to the ground.

2. Signal Path:

   • The bidirectional switch can be used to connect or disconnect two signals.
   • Connect the input signal to the IN pin and the output signal to the OUT pin.

3. Control Signal:

   • The switch is controlled by the EN (Enable) pin.
   • Apply a high logic level (V_DD) to the EN pin to turn the switch ON.
   • Apply a low logic level (GND) to the EN pin to turn the switch OFF.

4. Handling Precautions:

   • Ensure that the supply voltage is within the specified range to avoid damage.
   • Do not exceed the maximum continuous or peak current ratings.
   • Store the device in a dry environment to prevent moisture damage.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high currents or temperatures.
   • Use a heatsink if necessary to maintain the junction temperature within the operating range.

6. Electrostatic Discharge (ESD) Protection:

   • Handle the device with ESD precautions to avoid damage.
   • Use grounded wrist straps and ESD-safe workstations when handling the device.

(For reference only)