Details

---

BUY VI-910084B https://www.utsource.net/itm/p/5878916.html

Parameter	Description
Part Number	VI-910084B
Type	Voltage Regulator
Input Voltage	5V to 24V DC
Output Voltage	Adjustable, 1.25V to 20V
Output Current	Up to 3A continuous
Efficiency	Up to 95% (depends on input/output voltages and load)
Package Type	TO-220
Operating Temp	-40°C to +85°C
Protection	Overcurrent, overtemperature, and short-circuit protection

Instructions:

1. Installation:

   • Ensure the input voltage is within the specified range (5V to 24V).
   • Connect the input voltage to the VIN pin and ground to GND.
   • Connect a load or output circuit to VOUT and GND.

2. Adjusting Output Voltage:

   • Use an external resistor divider network connected between VOUT, ADJ, and GND to set the desired output voltage.
   • The formula for setting the output voltage is: ( V_ = 1.25 times (1 + frac) ).

3. Heat Management:

   • For applications requiring high current, ensure adequate heat sinking to maintain operating temperature within limits.

4. Testing:

   • After installation, verify the output voltage with a multimeter before connecting any sensitive components.
   • Check for proper regulation under varying loads.

(For reference only)