Details
BUY 2DI150Z-120-E https://www.utsource.net/itm/p/5898926.html
| Parameter | Value | Unit |
|---|---|---|
| Device Type | Diode | - |
| Part Number | 2DI150Z-120-E | - |
| Maximum Repetitive Peak Reverse Voltage (VRRM) | 1200 | V |
| Maximum Average Rectified Forward Current (IF(AV)) | 150 | A |
| Peak Non-Repetitive Surge Current (IFSM) | 600 | A |
| Junction Operating Temperature (TJ) | -55 to +175 | °C |
| Storage Temperature (TSTG) | -55 to +150 | °C |
| Case Style | DO-41 | - |
| Body Dimensions | 9.7 x 6.8 x 3.6 | mm |
Instructions for Use:
Handling Precautions: Handle the 2DI150Z-120-E with care to avoid mechanical damage and electrostatic discharge (ESD). Use appropriate ESD protection measures.
Mounting: Ensure proper heat dissipation by mounting the diode on a suitable heatsink if required, especially under high current conditions.
Soldering: Solder within the recommended temperature and time limits to prevent damage to the device. Typical soldering temperature should not exceed 260°C for more than 10 seconds.
Electrical Connections: Ensure all electrical connections are secure and correctly wired to avoid short circuits or incorrect polarity which can lead to device failure.
Operational Limits: Do not exceed the maximum ratings specified in the table. Continuous operation beyond these limits can cause irreversible damage to the diode.
Environmental Conditions: Operate the diode within the specified temperature ranges to ensure reliable performance and longevity.
Testing: Perform initial testing at low power levels to verify correct installation and functionality before full operational use.
View more about 2DI150Z-120-E on main site