Details

---

BUY TLP521-1GB(GB,F) https://www.utsource.net/itm/p/5922091.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 5 mA		1.2	1.6	V
Reverse Breakdown Voltage	VBR	IR = 1 mA	5		7	V
Forward Current	IF				50	mA
Output Collector-Emitter Saturation Voltage	VCE(sat)	IC = 5 mA, IF = 5 mA		0.4	0.5	V
Output Collector Leakage Current	ICEO	VR = 30 V, TA = 25掳C			100	nA
Propagation Delay Time	tppl	VIN = 5 V, VOUT = 1.4 V, RL = 510 惟		8	12	渭s
Rise Time	tr	VIN = 5 V, VOUT = 1.4 V, RL = 510 惟		1	3	渭s
Fall Time	tf	VIN = 5 V, VOUT = 1.4 V, RL = 510 惟		1	3	渭s

Instructions for Use:

1. Mounting and Handling:

   • Handle the TLP521-1GB with care to avoid damage.
   • Ensure proper mounting on a PCB with appropriate soldering techniques.

2. Power Supply:

   • The device operates under standard power supply conditions but ensure not to exceed the maximum ratings listed.

3. Input Circuit:

   • Connect the input LED in series with a current-limiting resistor to maintain the forward current (IF) within the specified limits.

4. Output Circuit:

   • Connect the output transistor collector to the positive supply through a load resistor.
   • Ensure that the load current does not exceed the maximum allowable collector current (IC).

5. Signal Integrity:

   • Keep signal traces short to minimize noise and interference.
   • Place decoupling capacitors close to the power pins if necessary.

6. Environmental Considerations:

   • Operate the device within the recommended temperature range to ensure reliable performance.
   • Protect against moisture and corrosive environments.

7. Testing:

   • Before final assembly, test the device using the specified test conditions to verify correct operation.

8. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)