Details

---

BUY MX25L3206EPI-12G https://www.utsource.net/itm/p/6353734.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	3.6	V
Standby Current	ISB	VCC = 3.0V	-	1.0	-	μA
Active Current	IOPR	VCC = 3.0V, fCK = 50 MHz	20	-	-	mA
Programming Current	IPR		2	-	8	mA
Erase Time	TEB	64KB Sector	-	3.5	-	s
Page Program Time	TPP	256 Bytes	-	3.0	-	ms
Data Retention			20	-	-	Years
Operating Temperature	Topr		-40	-	85	°C
Storage Temperature	Tstg		-65	-	150	°C

Instructions for MX25L3206EPI-12G

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the range of 2.7V to 3.6V for proper operation.

2. Initialization:

   • Apply the reset command (RESETEN followed by RESET) upon power-up to initialize the device.

3. Read Operations:

   • Use standard SPI read commands to access data stored in the memory. Ensure the clock frequency does not exceed 50 MHz for reliable data transfer.

4. Write Operations:

   • Before writing data, issue a Write Enable command (WREN). After programming or erasing, check the status register to ensure completion.

5. Programming and Erasing:

   • For page programming, use the Page Program command with up to 256 bytes per page. The typical program time is 3.0 ms.
   • For sector erase, use the Sector Erase command. A typical erase time for a 64KB sector is 3.5 seconds.

6. Data Protection:

   • Utilize the Status Register Write Protect bit to prevent accidental writes or erases.

7. Temperature Considerations:

   • Operate within the temperature range of -40°C to +85°C for optimal performance. Store the device between -65°C and +150°C.

8. Handling Precautions:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage. Follow ESD handling guidelines during assembly and testing.

9. Endurance and Retention:

   • The device supports at least 100,000 program/erase cycles and retains data for up to 20 years under specified conditions.

(For reference only)