Details

---

BUY FF225R17ME4 https://www.utsource.net/itm/p/6394831.html
EconoDUAL3 module with trench/fieldstop IGBT4 and Emitter Controlled 3 diode

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Rated Collector-Emitter Voltage	VCE	-	1700	-	V
Rated Gate-Emitter Voltage (Absolute Maximum)	VGE(max)	-	20	-	V
Continuous Collector Current (Tc = 25°C)	IC	-	225	-	A
Continuous Collector Current (Tc = 100°C)	IC	-	150	-	A
Pulse Collector Current (8/20 μs)	IC(pulse)	-	675	-	A
Total Dissipation (Tc = 25°C)	PTOT	-	3500	-	W
Junction Temperature	TJ	-	-	150	°C
Storage Temperature Range	TSTG	-55	-	150	°C
Thermal Resistance, Junction to Case	RthJC	-	0.25	-	K/W
Turn-On Time (IC = 225 A, VGE = 15 V)	ton	-	1.2	-	μs
Turn-Off Time (IC = 225 A, VGE = -15 V)	toff	-	1.5	-	μs
Reverse Recovery Time (IC = 225 A, VGE = -15 V)	trr	-	120	-	ns
Forward Voltage Drop (IC = 225 A, VGE = 15 V)	VCE(sat)	-	1.8	-	V

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical damage.
   • Use appropriate thermal management techniques to ensure the junction temperature does not exceed 150°C.
   • Mount the device on a heatsink with adequate thermal paste to minimize thermal resistance.

2. Electrical Connections:

   • Connect the gate and emitter terminals carefully to avoid short circuits.
   • Use proper gate drive circuits to ensure reliable operation. The gate-emitter voltage should not exceed ±20V.
   • Ensure that the collector current does not exceed the rated values at the specified temperatures.

3. Pulse Operation:

   • For pulse applications, ensure that the pulse width and frequency are within the safe operating area.
   • The pulse current should not exceed 675A for an 8/20 μs pulse.

4. Storage and Transportation:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle the device with ESD (Electrostatic Discharge) precautions to prevent damage.

5. Testing:

   • Before mounting, test the device using the specified test conditions to ensure it meets the required parameters.
   • Use appropriate test equipment and methods to avoid damaging the device during testing.

6. Safety:

   • Always follow safety guidelines when handling high-voltage and high-current components.
   • Ensure that the device is properly insulated and protected from overvoltage and overcurrent conditions.

(For reference only)