Details

---

BUY 74VHC14FT https://www.utsource.net/itm/p/6403523.html
IC INVERTER 6CH 1-INP 14TSSOPB

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VCC	2.0	-	6.0	V
Input Low Voltage	VIL	-	0.8	1.5	V
Input High Voltage	VIH	3.5	-	VCC	V
Output Low Voltage	VOL	0.0	0.1	0.2	V	@ IOL = 16 mA
Output High Voltage	VOH	2.4	2.7	3.4	V	@ IOH = -4 mA
Input Current	IIN	-1	0	1	μA	@ VIN = 0 V or VCC
Output Current (Sink)	IOL	-	-	16	mA
Output Current (Source)	IOH	-	-	-4	mA
Propagation Delay Time	tpLH/tpHL	-	6	10	ns	@ VCC = 5 V, TA = 25°C
Power Consumption	Ptot	-	-	100	mW	@ TA = 25°C, f = 1 MHz

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 2.0 V to 6.0 V.
   • Connect the V_CC pin to the power supply and GND to ground.

2. Input Signals:

   • Apply input signals to the input pins (1, 2, 4, 5, 6, 7).
   • The input low voltage (V_IL) should be between 0.0 V and 1.5 V.
   • The input high voltage (V_IH) should be between 3.5 V and V_CC.

3. Output Signals:

   • The output low voltage (V_OL) will be between 0.0 V and 0.2 V when the output is low.
   • The output high voltage (V_OH) will be between 2.4 V and 3.4 V when the output is high.
   • Ensure the load connected to the output does not exceed the maximum output current ratings.

4. Propagation Delay:

   • The propagation delay time (t_pLH/t_pHL) is typically 6 ns at 5 V supply voltage and 25°C ambient temperature.

5. Power Consumption:

   • The total power consumption (P_tot) should not exceed 100 mW under normal operating conditions.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

7. Operating Temperature:

   • The device is designed to operate within the temperature range of -40°C to +85°C.

8. Package Information:

   • The 74VHC14FT is available in a 14-pin DIP (Dual In-line Package) or SOIC (Small Outline Integrated Circuit) package.

9. Testing and Verification:

   • After assembly, verify the functionality of the device by applying known input signals and measuring the corresponding output signals.

(For reference only)