Details

---

BUY TLP152 https://www.utsource.net/itm/p/6487243.html
OPTOCOUPLER, GATE DRIVER, 3.75KV, SMDIP, No. of Channels:1 Channel, Optocoupler Case Style:Surface Mount DIP, No. of Pins:5Pins, Isolation Voltage:3.75kV, Packaging:Each, Product Range:-, MSL:MSL 1 - Unlimited, No. of Chann , RoHS Compliant: Yes

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.2	1.6	V	IF = 20 mA, TA = 25掳C
Peak Forward Current	IF(PK)	-	-	30	mA	t < 1 ms, TA = 25掳C
Continuous Forward Current	IF	-	-	20	mA	TA = 25掳C
Reverse Voltage	VR	-	-	5	V	TA = 25掳C
Output Collector-Emitter Saturation Voltage	VCE(SAT)	-	0.3	0.5	V	IC = 5 mA, IF = 5 mA, TA = 25掳C
Output Collector Current	IC	-	-	50	mA	TA = 25掳C
Current Transfer Ratio (CTR)	CTR	100	200	400	%	IF = 5 mA, IC = 5 mA, TA = 25掳C
Isolation Voltage	VIORM	-	-	3750	Vrms	1 minute, 50/60 Hz
Storage Temperature Range	TSTG	-40	-	105	掳C	-
Operating Temperature Range	TA	-40	-	85	掳C	-

Instructions for Use:

1. Forward Current (I_F):

   • Ensure that the forward current does not exceed 20 mA continuously to avoid damaging the device.
   • For pulse applications, the peak forward current can be up to 30 mA for durations less than 1 ms.

2. Reverse Voltage (V_R):

   • The device should not be subjected to reverse voltages exceeding 5 V to prevent damage.

3. Output Collector-Emitter Saturation Voltage (V_CE(SAT)):

   • When the output is saturated, the voltage across the collector and emitter should be kept below 0.5 V to ensure proper operation.

4. Current Transfer Ratio (CTR):

   • The CTR is a measure of the efficiency of the optocoupler. It indicates the ratio of the output collector current (I_C) to the input forward current (I_F). The typical CTR is 200%, but it can range from 100% to 400%.

5. Isolation Voltage (V_IORM):

   • The device provides electrical isolation up to 3750 Vrms for 1 minute at 50/60 Hz. This ensures safety and prevents electrical interference between the input and output circuits.

6. Temperature Considerations:

   • The storage temperature range is -40掳C to 105掳C, and the operating temperature range is -40掳C to 85掳C. Ensure that the device is used within these limits to avoid thermal stress and potential failure.

7. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress and electrostatic discharge (ESD). Follow standard ESD protection procedures during handling and installation.

8. Soldering:

   • Use a soldering iron with a temperature not exceeding 300掳C and complete the soldering process within 10 seconds to avoid thermal damage to the device.

9. Testing:

   • Before integrating the TLP152 into a circuit, test its parameters to ensure it meets the specified values. This can help identify any potential issues early in the development process.

(For reference only)